I was telling you about it in detail today, the LEGO ICONS set 10318 Concorde is now available as a VIP Insiders preview on the official online store.

If you took the time to read my review, so you know what to expect with this box of 2083 pieces sold at the public price of 199.99 €. In summary, the product is rather convincing but it does not escape some technical defects. It's now up to you to decide whether to crack without waiting for a next doubling of Insider points or a reduction elsewhere than at LEGO.

No current promotional offer on the Shop currently.

LEGO ICONS 10318 CONCORDE ON THE LEGO SHOP >>

(All links to the shop redirect to the version of the official shop for your country of connection)

Today we are quickly interested in the content of the LEGO ICONS set 10318 Concorde, a box of 2083 pieces which will be available on the official online store, as an Insiders preview, at the retail price of €199.99 from September 4th.

This product had received a rather favorable reception during its official announcement a few weeks ago, but the latter was then supported by a series of official visuals highlighting the product and it is therefore time to check if the promise is kept. Spoiler : this is not completely the case, you will understand why below.

You have probably already noticed that this Concorde with LEGO sauce is neither in the colors of Air France nor in the British Airways version. It's a bit of a shame, the Aérospatiale France / British Aircraft Corporation livery of the model 002 provided here being a bit too dated.

We can imagine that LEGO and Airbus did not wish to offer a livery in the colors of Air France which would inevitably have recalled the crash of July 25, 2000 and we will therefore do with this vintage version, the main thing being that the LEGO model is relatively faithful to the reference aircraft.

This is the case except for a few details, in particular at the level of the nose which is here in my opinion a little too round and voluminous like an ice cream cone. For the rest, the exercise seems to me generally rather successful for a model of barely more than 2000 parts and 102 cm long by 43 cm wide intended for the exhibition.

The assembly process cleverly alternates between building the internal mechanism that will later deploy the landing gear and stacking white bricks to form the wings and cabin of the aircraft. We don't get bored, the sequences are well distributed and we start with the central section of the plane and then finish with the extremities by installing the engine blocks in passing.

The mechanism for pulling out the gears circulates inside the cabin, it ends up in the tail of the plane which therefore serves as a wheel for a little fun. LEGO insists on the possibility of testing the proper functioning of each section of the mechanism during the assembly phase of the set, it is wise and it avoids having to disassemble everything if an axis has been incorrectly inserted or positioned. Only the central and front axles are concerned by this mechanism, the tail wheel must be deployed manually. One could also have imagined a synchronization of the movement of the landing gear with that of the nose of the aircraft, this is not the case and the latter must be handled separately.

A fun little detail, LEGO has also provided some "accessories" used only during assembly to hold a section in place or allow you to work vertically. All the parts used for these temporary supports are orange in color, you will not be able to miss them or confuse them with elements permanently installed on the model. Over the pages, we install or remove these sections, the process is quite unusual but very practical. On arrival these temporary supports remain unused, you can do with them what you want.

You have already seen it on the official visuals, it is possible to remove a short section of the fuselage to admire a few rows of seats. the functionality is anecdotal but it has the merit of existing and it will impress your friends. The assembly is perfectly rigid, the wings do not bend under their own weight or that of the engines and the model can be removed from its base and easily handled. Watch out for the two little ones Tiles quarter-circle placed on and under the fuselage, they only hold stuck between two tenons and they come off easily.

Don't spoil yourself too much about the different construction stages if you have planned to buy this product, all the fun is once again in the few hours of assembly with some good ideas and an assembly process that is paced enough not to overdo it. focus on the few slightly repetitive phases. The pages of the instruction booklet are embellished with some information on the aircraft, you will not come out much more learned on the subject but it is entertaining.

The real problem of the product is elsewhere and it is not new or reserved for this product: the white parts are unfortunately not all the same white. From certain angles and with the right lighting, I count up to three different shades on the fenders and it's ugly. The official visuals have obviously been extensively retouched to erase this aesthetic defect, in real life the real model will lose some of its luster when it comes to displaying it on the dresser in the living room. It even seems that some parts have slightly yellowed before time, it will be up to everyone to assess their level of tolerance regarding this technical defect but I would have at least warned you.

For my part, I still cannot understand how a manufacturer who has been in this business for 90 years does not know how to properly tint his parts so that they are almost all the same color. This product is no exception, regulars of the Sand green or Dark Red know that it is already complicated with these specific colors but we are talking about white here. Creamy white, off-white but white. The effect is all the more visible on the wings as it is reinforced by the separation between the different parts, with a line that circulates between the different colors and which delimits each of the elements concerned.

The cockpit, whose nose can be more or less inclined like on the real Concorde, benefits from two nicely executed canopies with pad printing (a little too white) on the main glazing and a protective glass installed on the mobile part of the nose which is supplied directly injected in two textures. The latter is delivered in a dedicated paper packaging, the other is simply thrown into one of the bags of the set with the risks that we know.

We will also note some alignment problems at the level of the red line which crosses the cabin horizontally, it is alternately embodied by red parts or by pad printing on white parts which is not perfectly positioned on the elements concerned to guarantee a perfect connection. This detail will probably not be a problem for hardcore fans of the plane or LEGO, but we are still talking here about a white model at 200 €, attention to detail should have been in order.

For those who are wondering: the pad-printed windows are consistent with the reference aircraft, the Concorde was well equipped with smaller windows than conventional airliners.

The small base provided, which takes up the aesthetics of the base of certain classic models of the plane, does its job: it makes it possible to present the device with a slightly dynamic staging and the stability of the whole is at all test thanks to the perfectly balanced positioning of the support. It's up to you whether you want to display the Concorde in the flight phase with the landing gear retracted and the nose straight or in the take-off phase with the landing gear extended and the nose tilted. The small vintage-looking plate placed on the front of the display is pad-printed, there are no stickers in this box. This plate distills some facts about the plane, it's vintage and it's fitting with the proposed livery which is far from being the most recent.

Like many of us, I was pretty excited about this product so far following its official announcement. I once again let myself be convinced by the pretty official visuals which promised a model with a finished aesthetic, it's not the impression I have having this Concorde in my hands. The designer has done his homework and the returned copy is in my opinion frankly very honest, but the main technical defect of the product comes in my opinion a little to spoil the party. Many will however be satisfied with this Concorde which, observed from a certain distance, will do the trick, installed for example next to the Titanic.

Note: The product shown here, provided by LEGO, is as usual involved. Deadline fixed at September 13, 2023 next at 23:59 p.m. Simply post a comment below the article to participate. Your participation is taken into account regardless of your opinion. Avoid “I’m participating” or “I’m trying my luck”, we suspect that this is the case.

Update : The winner was drawn and notified by email, his nickname is indicated below.

For those interested, know that it is now possible to pre-order the LEGO Ideas set 21343 Viking Village on the official online store. The product is displayed there at the public price of €139.99 with effective availability scheduled for October 1, 2023.

FNAC had opened the pre-order ball at the same price a few days ago but the brand has since revised the price of this box upwards. The set is now displayed there at 151.99 €.

We will talk more about this box in a few days.

LEGO IDEAS 21343 VIKING VILLAGE ON THE LEGO SHOP >>

Fans of the Disney universe will be able to treat themselves from October 1, 2023 to a mini reproduction of the palace of the Sultan of Agrabah seen in Aladdin with the LEGO Disney Princess set 40613 Mini Disney Palace of Agrabah which will be available at the public price of 39.99 €.

In the box, 506 pieces to assemble the palace 15 cm high by 14 cm wide and 16 cm deep. No minifigs to go along with the build.

40613 MINI DISNEY PALACE OF AGRABAH ON THE LEGO SHOP >>

LEGO is now anticipating releases in October 2023 with the launch of the LEGO Star Wars set on its official store 40658 Millennium Falcon Holiday Diorama.

This small box of 282 pieces will be available from October 1st at the public price of 29.99 €, it will allow you to assemble a small festive scene taking place in the corridors of the Millennium Falcon and to obtain 5 characters: Rey and Finn with sweaters Christmas uglies, Chewbacca, BB-8 and a Porg,

40658 MILLENNIUM FALCON HOLIDAY DIORAMA ON THE LEGO SHOP >>