Today we are quickly interested in the LEGO Star Wars set 75256 Kylo Ren's Shuttle (1005 pieces - 129.99 €), a novelty launched last October which also has the mission of making us forget the ship really out of the set 75104 Kylo Ren's Command Shuttle marketed in 2015.

There is no suspense, it's mission accomplished with this new interpretation of Kylo Ren's ship that sticks a little more to the model used on the screen. The color is the right one, the integrated functions finally allow to put the LEGO version in "realistic" configurations and the endowment in minifigs is sufficiently motivating to justify the purchase of this new box.

On the assembly side, it's quite pleasant in the early stages before logically becoming a bit repetitive when it comes to tackling the wings of the ship. The cockpit is spacious enough to accommodate three minifigs without having to enter them with forceps and here we find the usual difference in scale inside / outside which allows to have a nice exhibition product that becomes a playset when you access the different interior spaces.

The cockpit seats are attached to an access ramp that can be deployed under the vessel. The functionality is a bit superfluous and this ramp is not really accessible, except to flip the model, which in itself is not very practical ...

Two Spring-Shooters are integrated under the hull of the ship and they are placed in such a way as not to disfigure the model and to annoy collectors. We also quickly assemble the mechanism that will allow the wings to deploy by gravity when lifting the ship.

It's well thought out, it works and the effect obtained during takeoff is very interesting. Even the most jaded should be taken in, I know what I'm talking about. To bring the wings to the vertical, just turn the right engine placed at the back of the ship. Here too, the mechanism is discreet and perfectly integrated.

The outer covering of the wings is basic but sufficient. Inside, it's immediately more messy with visible reinforcement pieces and the whole system that allows you to store the tip of the wing under the widest part. The mechanism designed to achieve this effect is also very well thought out, it is just not completely hidden in the thickness of the wings and the result is visually a little messy as it is.

I do not hold it against the designer, the playability of the whole really benefits from this feature and it would have been a shame to do without it for questions of finish. The same goes for the few empty spaces at the level of the Technic elements which serve as a mobile support for the upper part of the wings.

Sooner or later we'll get a UCS version of this ship anyway, and those who aren't ready to put up with the aesthetic compromises of this version should one day have an even bigger, more detailed and up-to-date ship. more successful finish.

Kylo Ren uses here the outfit and the head seen in several sets whose reference 75216 Snoke's Throne Room marketed in 2018, but it is equipped with its helmet in a "repaired" version and the accessory benefits from a really successful pad printing on its entire surface. If you buy this box only for Kylo Ren, go your way and wait for the set 75264 Kylo Ren's Shuttle Microfighter planned for early 2020: You will get exactly the same minifigure for € 9.99 instead of € 129.99.

The two Knights of Ren (Knights of Ren) may seem a bit generic but the combination of parts and accessories, including Obi-Wan's new hood that comes here in black, works pretty well for both characters. The two minifigs provided here don't reveal much of who these characters are, but I expect their contribution to the film to be boiled down to a few clashes before I see them go by the wayside for good. . To gather the whole troop, it will be necessary to wait for the beginning of 2020 with two other figurines distributed in the boxes to come.

If the First Order Stormtrooper with his new helmet was already in the set 75225 Elite Praetorian Guard Battle Pack, the other figurines delivered in this box are new, at least until the availability of the set 75266 Sith Troopers Battle Pack for the Sith Trooper whose helmet and outfit benefit from high-end pad printing. Under the helmets of these two characters, nothing very innovative: we find the usual head of angry Clone Trooper.

General Pryde's minifigure, portrayed onscreen by Richard E. Grant, doesn't look too exciting with its generic outfit but it gets the job done with a pretty successful face.

In short, here is a nice box that offers something to have a little fun thanks to some interesting techniques used to give mobility to Kylo Ren's ship. In my opinion, the set is convincing both in its quality of a really elaborate playset and an exhibition model that can sit on a shelf. It returns the 2015 version to the rank of very preliminary prototype that it is better to forget and when in addition it is sold for less than 100 € at Amazon, it would be a shame to miss out on a product that offers very balanced content.

[amazon box="B07ND9TJF6"]

Note: The set presented here, supplied by LEGO, is as usual in play. Deadline fixed at December 12, 2019 next at 23pm.

Update : The winner was drawn and was notified by email, his nickname is indicated below. Without a response from him to my request for contact details within 5 days, a new winner will be drawn.

Today we are quickly interested in the other Batmobile that will be available from November 29: that of the LEGO Batman set 40433 1989 Batmobile Limited Edition which will be offered for the purchase of the set 76139 1989 Batmobile (249.99 €).

Valued at 29.99 € by LEGO, this small set of 366 pieces has everything of a product that could have ended up on the shelves of the DC Comics section without having to blush in front of the other boxes already on sale.

You will understand, LEGO wishes here to offer a compact version of the imposing model of the set 76139 and this mini Batmobile also inspired by the one seen in the film by Tim Burton is a high-end promotional product as we would like to see more often at LEGO.

This more or less minifig scale interpretation of the vehicle is in my opinion at least as convincing as that of the 76139 set, with some inevitable compromises motivated by the reduced scale of the model. The cockpit canopy no longer slides forward but tilts to allow access to the cockpit designed to accommodate a minifig and the two machine guns placed on the front cover, here embodied by Stud Shooters, are not retractable.

The only real complaint I can make with this model is the use of gray barrels to embody the side air intakes. As I said before, I often have a bit of trouble with the regular hijacking of these barrels to transform them, for example, into reactors and I find them inappropriate here as well. They are not even the right color and you can only see them. Some will see it as a nod to the many possibilities offered by certain elements of the LEGO inventory, I see it rather as a lazy solution that spoils the general appearance of the model a bit.

For the rest, this mini Batmobile is like its big sister delivered with a rotating support on which a small presentation plate hangs. It is also the only sticker in the box that dresses this small plate.

On the functional side, on the sidelines of the movable canopy, the movement of the vehicle causes the engine nozzle to turn at the rear. It's anecdotal but it's always good to take knowing that the youngest will have the opportunity to discover during the assembly the simple mechanism which allows to obtain this effect.

There is not really much to be said about this mini Batmobile, knowing that it is additionally offered for the purchase of a set which is also so convincing that many fans would have it. bought even without this gift.

This mini version is aesthetically very successful, it is pleasant to build and it will sit on your shelves without any problem alongside those of the sets 76119 Batmobile: Pursuit of The Joker, 76052 Batman Classic TV Series Batcave (2016)  76045 Kryptonite Intercept (2016) et 76035 Jokerland (2015). We can regret the absence of a minifigure in this box, but let's not be too demanding, Batman is already delivered in the set 76139 1989 Batmobile.

In short, if there was one more reason to fall for the 76139 set from its launch on November 29, this set should be enough to motivate you. This will be the case for me, although I would have invested in set 76139 anyway without this nice gift.

Note: The set presented here, supplied by LEGO, is as usual in play. Deadline fixed at December 8, 2019 next at 23pm.

Update : The winner was drawn and was notified by email, his nickname is indicated below. Without a response from him to my request for contact details within 5 days, a new winner will be drawn.

A few hours before the launch at LEGO of the pre-weekend VIP weekend offersBlack Friday, we take a quick look at the small limited edition set that will be offered from 120 € of purchase on the LEGO Shop and in the LEGO Stores: the benchmark 40338 Christmas tree. This small box of 392 pieces will then be offered, always for the same minimum purchase amount from November 28 to December 2, 2019.

This new festive gift allows you to assemble a Christmas tree with a respectable height: 22 cm high. The model is rather detailed with a stack of layers of green coins slipped over a central trunk and decorated with colorful balls, gray cookies and diamonds in different hues.

The icing on the cake, the construction is placed on a base which allows the toy carousel placed at the foot of the tree to turn with a wave of the hand. The functionality is anecdotal, but we will not reproach a manufacturer specializing in construction toys for making an effort on the possibilities offered by a small product. I was a little disappointed when I discovered the function, I expected without really knowing why that the entire tree would turn, but it was ultimately only the merry-go-round that moved. It is however logical.

In short, LEGO is offering here a small promotional product which has benefited from a careful design and which will easily find its place on the corner of a piece of furniture during the holiday season. Too bad the minimum purchase amount required (120 €) to be offered this pretty little box is so high ...

Note: Two copies of the set presented here, supplied by LEGO, are included. Deadline fixed at  December 7, 2019 next at 23pm. 

Update : The winners were drawn and were notified by email, their nicknames are indicated below.

Today we are very quickly interested in the set 75248 Resistance A-Wing Starfighter (269 pieces - 29.99 €), another chestnut tree from the Star Wars range which has already been the subject of multiple adaptations to the LEGO sauce for 20 years.

With each new version its improvements, and here we benefit from a ship more slender than usual, which is not to displease me. The set is a little less clumsy than the 2017 version of the set 75175 A-Wing Starfighter, that's always what it takes.

Everything is assembled in 15 minutes, there is nothing here to occupy a young fan for a few hours. It will therefore be necessary to count on the ludic potential of the whole to prolong the "experience" while living "[even more] fun space adventures".

Two Spring-Shooters are hidden under the cabin and the firing is triggered via the black buttons accessible at the front of the cabin. The mechanism is very well integrated and does not alter the general appearance of the vessel, a detail that will please collectors keen to line up models rather than toys on their shelves.

On the cockpit side, it's minimum service with the possibility of placing Snap Wexley there, which will have no control console. This new version of the A-Wing also benefits from real retractable landing gear. These elements are rather basic but they allow to really elevate the ship and give it some allure.

On a purely aesthetic level, the blue pins which hold the two dummy guns on the sides of the vessel are in my opinion a little off topic but this is not dramatic for a product which is not intended to serve as a reference model. .

Even if the green tint of the stickers is rather consistent with the parts on which they take place, we regret the large number of stickers to stick on the fuselage of this small vessel intended to be handled by young fans not always very careful. Stickers on a (really) white background suffer from the usual problem of color shift with white-cream pieces.

Two minifigs accompany the spaceship, pilot Temmin "Snap" Wexley (Greg Gunberg, JJ Abrams' friend back in this new episode of the saga) and Lieutenant Kaydel Ko Connix, played on screen by Billie Lourd who does not is other than Carrie Fischer's daughter.

Snap Wexley is entitled to a new face, to the helmet already seen on the head of the same character in the Microfighters set 75125 Resistance X-Wing Fighter (2016) and the outfit already worn by Poe Dameron in the set 75102 Poe's X-Wing Fighter (2015)

Connix's minifigure features Sally Ride and Tina Goldstein's features and Leia's hair delivered here in Medium Dark Flesh, all plugged into a unique torso with successful pad printing. The outfit looks true to what has already been revealed about the character via the visual of the Topps map which is currently circulating on the internet.

In short, this set does not add much to the LEGO Star Wars range and its acquisition is only justified by the presence of Kaydel Ko Connix who will find its place in the Ribba frames of many collectors anxious to bring together all the characters of the saga, including extras making a stealthy appearance on screen. LEGO knows how to distribute the most requested minifigs in all the boxes of each new wave, we can not blame him for trying to sell as many sets as possible.

Like I said about the set ship 75257 Millennium Falcon, if you do not yet have an A-Wing in your collection, this set will do well, provided you find it at a price much lower than that charged by the manufacturer.

Note: The set presented here, supplied by LEGO, is as usual in play. Deadline fixed at December 5, 2019 next at 23pm.

Update : The winner was drawn and was notified by email, his nickname is indicated below. Without a response from him to my request for contact details within 5 days, a new winner will be drawn.

Time to take a quick look at the LEGO Star Wars set 75257 Millennium Falcon (1353 pieces - 159.99 €) with a new interpretation of the most emblematic spaceship of the Star Wars saga which is also a chestnut tree from the LEGO range.

With each new version, its improvements, its modifications, its qualities and its defects. There is always a Millennium Falcon in the LEGO catalog and it is ultimately the one to buy to have fun or to please a young fan who has not known the previous versions: while the sets removed from the spokes are selling too expensive in the aftermarket, the current version is still available on sale somewhere.

This 2019 version, based on the film The Rise of Skywalker, uses the usual recipe: A (very) compact vessel, with an acceptable exterior appearance, a basic but sufficient interior and maximum playability allowed by the various mobile panels of the cabin.

The ship's frame here is made up of Technic elements that give it all the rigidity it needs to withstand the onslaught of young fans. A few plates to hide the bars and we then assemble the different spaces that serve as a fun base for this playset. The interior is a little empty, but we will console ourselves by telling ourselves that there is room to stage the various characters provided.

The overall look of the ship is good, this model is not a 5000 piece UCS and compromises in ship shape are inevitable. Seen from afar, this Millennium Falcon almost looks great. Up close, it is immediately less obvious with a lot of rough angles and holes in the cabin.

Like on the ship in the set 75105 Millennium FalconTwo Spring-Shooters are integrated into the mandibles of the vessel and you just need to slide your finger into the openings to trigger the shot.

The large sheet of stickers provided will not surprise anyone but it has a rather annoying flaw: most of the round stickers provided are not correctly centered and they will have to be aligned taking into account only their final positioning to compensate.

The rear of the ship is rather successful with the integration of transparent blue parts on a white background. This solution for reproducing the propulsion system is undoubtedly the best possible without having to resort to additional lighting. The hinges retaining the upper panels are really very apparent here, but we will do with it.

Under the ship, it is minimum service with four fixed and fairly basic landing gears and a set of laser cannons based on ski poles plugged into cones that come off easily and that you must avoid losing.

The pizza slice opening system seen in the set 75105 Millennium Falcon marketed in 2015 goes by the wayside with here larger portions of the cabin which can be opened to allow access to the various playable spaces. These different elements can obviously be unclipped to completely discover the interior of the vessel and have fun without being hampered by the protruding plates.

Dejarik's table pad printed on a black shield is identical to the one seen in the set 75212 Kessel Run Millennium Falcon (2018) and the hyperdrive present in this new version is more basic than that of the set 75105 Millennium Falcon. It comes down here to a few pieces on which we stick a sticker.

The cockpit is still so cramped, impossible to accommodate more than three characters, DO included. The canopy and the front face are nicely pad printed, in the right shade, but the whole obtained by assembling the two half-cones is only held by the two tenons visible above the occupants' heads. This is in my opinion a bit tight for a playset. It is also around the cockpit that we find the most approximate finishes of this model with a very unsightly fixing clip for the upper panel of the cabin which remains far too visible.

The endowment in minifigs is correct here even if many collectors will be disappointed to obtain new copies of the minifigs of C3-PO, R2-D2 and Chewbacca already delivered identically in many boxes. They will console themselves with the minifigs of Lando Calrissian, Finn and Boolio.

The star of the set is obviously Lando Calrissian with a very successful minifigure which honors the character played on the screen by Billy Dee Williams but which remains consistent with the younger version of Donald Glover. the hairstyle used here is perhaps a little too "disco" but the details of the face are enough to make the whole sufficiently believable in my eyes. The minifigure comes with two elements that make up Lando's cape, I wasn't asking for so much and would gladly have done without the upper part.

Finn's minifigure is not 100% new, the character's head delivered here is identical to the one seen in the set 75176 Resistance Transport Pod (2017). I'm not sure that the minifigure deserved to receive the hair of young Lando or Nakia (Black Panther) but we will do with it.

We do not know much about Boolio, the alien provided here in a very successful outfit and faithful to what we have seen for the moment that of the character of the film. The character's head is also very convincing with a mix of hard plastic and softer material for the horns and a two-color injection.

In short, if you don't have a Millennium Falcon version System, it is obviously this one that you have to buy right now, especially since the box is already on sale with a reduction of 32% on its usual retail price: 109.00 € at Amazon instead of 159.99 € on the official LEGO store as of this writing.

The youngest will find what they are looking for with a solid and playful playset and collectors will add a new version of the Millennium Falcon to their probably already crowded shelves and some pretty new minifigs in their Ribba frames. There is something for everyone and Chewbacca, C3-PO and R2-D2 will end up in the usual drawer of invasive "duplicates".

Note: The set presented here, supplied by LEGO, is as usual put into play. To participate in the raffle, all you have to do is post a comment (avoid the "I participate, I try, etc ..." be a little more constructive) on this article before November 25, 2019 next at 23pm. You have every right to disagree with me, this is not eliminatory.

Update : The winner was drawn and was notified by email, his nickname is indicated below. Without a response from him to my request for contact details within 5 days, a new winner will be drawn.